Buy Direct
Hal Leonard


Crown XLS 2000
Crown XLS 2000
AccordD Financing Financing available!
  • Steve's Code: 51445
  • Shipping Weight: 14lbs
  • Manufactured by: Crown

Price:   C $619.99 * Financing available for as low as $55.53/month for 12 months.  See details at checkout.

Add to Cart:     Ask Us a Question

This item is not currently in stock but is available for purchase.

You can contact our Internet sales department at for enquiries about expected delivery dates.

Introducing new Crown XLS 2000 power amplifier. The Crown XLS 2000 power amplifier delivers 375 watts of pure power into each channel. The XLS 2000 features XLR, 1/4", and RCA inputs assuring compatibility with almost any music source. Weighing in at only 10 pounds the Crown XLS 2000 power amplifier is sure to be a welcome addition to any mobile DJ, club, or installed sound system venue.

THE XLS Series of power amplifiers from Crown define the standard for live sound systems with unmatched performance, technology, and affordability.

This high-performance line consists of four models, each providing enormous power and flexibility thanks to the integrated PureBand Crossover System and PeakxLimiters. And weighing in at only 11 lbs or less, they provide the ultimate in lightweight portability. Generating chest-thumping lows and crystal clear highs, the four models in the series  the XLS 1000, XLS 1500, XLS 2000, and XLS 2500  are engineered to meet any demanding audio requirements  reliably and within budget.

Every XLS Series amplifier is backed by Crown's unequaled Three-Year, No-Fault, Fully Transferable Warranty that covers everything. With over five decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. So check out the Crown XLS Series. They are a powerful argument for performance, flexibility, and value!


  • High performance, lightweight Class-D amplifier  weighs less than 11 lbs.
  • Integrated PureBandCrossover System ensures seamless transitions from low- to high-frequency drivers
  • Integrated PeakxLimiters provide maximum output while protecting your speakers
  • XLR, 1/4", RCA Inputs ensure compatibility with any source
  • 1/4" Inputs can be used as loop-thrus to distribute signal to additional amplifiers

Rated Power Output

  • 2ohm Dual (per channel): 1,050W
  • 4ohm Dual (per channel): 650W
  • 8ohm Dual (per channel): 375W
  • 8ohm Bridge: 1,300W
  • 4ohm Bridge: 2,100W

*Maximum average power in watts at 0.5% THD, 1 kHz.


  • Sensitivity: (for full rated power at 4 ohms): 1.4 Vrms.
  • Frequency Response: (at 1 watt, 20 Hz to 20 kHz): +0 dB, 1 dB.
  • Signal-to-Noise Ratio: XLS 1000 > 97 dB XLS 1500, XLS 2000, XLS 2500 > 103 dB
  • Total Harmonic Distortion (THD): < 0.5%.
  • Intermodulation Distortion (IMD): (60 Hz and 7 kHz at 4:1) from full rated output to 30 dB: < 0.3%.
  • Damping Factor (8 ohm) 10 Hz to 400 Hz: >200.
  • Crosstalk (below rated 8 ohm power): At 1kHz: > 85dB, At 20kHz: >55dB
  • Input Impedance (nominal): 20 kilohms balanced, 10 kilohms unbalanced.
  • Load Impedance: 2 to 8 ohms per channel in Stereo, 4 to 8 ohms in Bridge Mono.
  • AC Line Voltage and Frequency Configurations Available (-+10%): 120 VAC 60 Hz, 100 VAC 50/60 Hz, 220 and 240 VAC 50 Hz.


  • Level: Two front-panel rotary level controls, one for each channel.
  • LCD Screen: Back-lit LCD allows for crossover configuration, amp mode configuration and clip compressor configuration. Menu/Prev/Next: Three buttons located near the LCD screen that are used to configure and access the integrated processing.
  • Power: Front-panel switch; on when in the IN position. Blue LED will illuminate when on.
  • Circuit Breaker: Back-panel breaker provides overload protection.

Integrated Processing

  • PureBand Crossover System
  • Crossover Filter: Linkwitz-Riley 24dB per octave
  • Crossover Frequency Range: 50 Hz - 3 kHz
  • Crossover Mode: Crossover (CH1=LPF, CH2=HPF), Low Pass (both channels LPF), High Pass (both channels HPF), Bridge (LPF or HPF)
  • Peak Limiters: Channel independent clip limiter designed to provide maximum output while protecting your loudspeakers


  • Signal Presence Indicators: Two green LEDs, one for each channel, illuminate when the channel's input signal exceeds 40 dBu.
    10 Indicator: Green LED flashes when output signal exceeds
    10 dB below clip.
    20 Indicator: Green LED flashes when output signal level exceeds
    20 dB below clip.
  • Clip Indicators: Two red LEDs, one for each channel, illuminate when the channel's output is being overdriven.
  • Thermal Indicator: Two red LEDs, one for each channel, illuminate when thermal compression begins.


  • Input Connectors: XLR (one per channel), 1/4 inch (one per channel), and RCA (one per channel). 1/4-Inch connectors can be used as loop-thrus to distribute signal to additional amplifiers.
  • Output Connectors: Two 4-Pole Speakon Output Connectors accept 2-pole or 4-pole Speakon connectors. The top Speakon connector is wired for both channels so it can be used for bridge mono wiring or for stereo wiring of two speakers to a single Speakon connector.
  • One pair of back-panel binding posts per channel; accepts banana plugs or bare wire. (European models do not accept banana plugs.)


  • XLS Series amplifiers provide extensive protection and diagnostic capabilities, including output current limiting, DC protection, circuit breaker, and thermal protection.


  • XLS 2000/XLS 2500: 10.35-Inch (26.29cm) depth
  • Ventilation: Flow-through ventilation from front to back.
  • Cooling: Internal heat sinks with forced-air cooling for rapid, uniform heat dissipation.
  • Weight: XLS 2000: 10.8 lb (4.9 kg)

Current Reviews: 0

This product was added to our catalog on 11/09/2010.

Customers who bought this product also purchased...

Peavey PV 215 2x15
Peavey PV 215 2x15
2-way trapezoidal sound reinforcement enclosure. 700 Wa...
C $399.99
Add to Cart