2-Way Biamped, Active 6.5-inch Coaxial Studio Monitors:

- Listen to your mixes reproduced with lifelike realism! The Eris® Pro 6's symmetric design and consistent acoustic center provides superior phase alignment between components to deliver a wide sweet spot, precise stereo imaging, and symmetrical dispersion patterns, making them ideally suited for immersive Dolby Atmos rooms and stereo mix environments alike.

- The Eris Pro 6's coaxial design provides a single acoustic point source that creates a natural listening experience, revealing the subtlest nuances in your recordings, while providing a three-dimensional soundstage, detailed transient response, and lifelike sonic reproduction. Combined with a punchy low-end that defies its compact size, the Eris Pro 6 provides a superior listening experience for both home studios and professional mix rooms.

- A 1.25-inch, ultra-low mass, silk-dome tweeter ensures snappy, accurate transient reproduction, while a 6.5-inch, woven-composite woofer offers tight, clear bass, with plenty of punch and no flab. A ported enclosure and 140 Watts of power allows the Eris Pro 6 to reach down to an astonishing 35 Hz, while a finely detailed transient response and stunning dynamics deliver a natural and less fatiguing experience.

Features:

- Single Point-Source Coaxial Design for Wider Sweet Spot and Better Phase Alignment

- 6.5-inch, Woven-Composite, Low-Frequency Driver

- 1.25-inch, Silk-Dome, High-Frequency Driver

- 140 W Class AB Amplification

- 35 Hz to 20 kHz Frequency Response

- 106 dB SPL (Peak, @ 1 Meter)

- Acoustic Tuning Controls: Acoustic Space (Flat, -2 dB, -4 dB), High Frequency (±6 dB, Center 10 kHz, Continuously Variable), Mid Frequency (±6 dB, Center 1 kHz, Continuously Variable), Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / Octave)

- XLR and ¼-inch TRS Balanced and RCA Unbalanced Rear-Panel Inputs

- Protection: RF Interference, Output-Current Limiting, Over-Temperature, Turn-On/Off Transient, Subsonic Filter

- Power Saver Mode (Engages After 40 Minutes)

- Wall and Ceiling Mountable

Inspired Design for Inspiring Results:

- Placing the high-frequency driver in the center of the low-frequency driver increases clarity, widens stereo imaging, and produces an incredibly even mid-range. Vocal clarity, the attack of a snare, and guitar presence shine through, allowing you to quickly and accurately place them in a mix and get the results you desire faster than ever before.

Symmetric Response:

- The Eris® Pro 6’s coaxial design provide a symmetrical dispersion resulting in a crisper stereo image, greater soundstage depth, and superior separation between components in a complex mix.

Set Up Your Studio Monitors for Your Room:

- Acoustic Tuning controls ensure you’ll get the flattest frequency response possible in your mix environment. You get Low Cut, Mid, and High controls, as well as 3-way Acoustic Space tuning that allows you to easily compensate for the sonic consequences of speaker placement against a wall or in a corner.

Electronics:

- Voltage: 120 V

- Wattage: 140 Watt

Hardware:

- Cabinet Material: Vinyl-Laminated, Medium-Density Fiberboard

Miscellaneous:

- Connection Type: IEC

Monitors:

- Protections: RF Interference /// Output-Current Limiting /// Over-Temperature /// Turn-On/Off Transient /// Subsonic Filter

- Audio Switches: Acoustic Space (Flat, -2 dB, -4 dB) /// Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / Octave)

- Audio Controls: Volume: High Frequency (±6 dB, Center 10 kHz, Continuously Variable) /// Mid Frequency (±6 dB, Center 1 kHz, Continuously Variable)

- Peak SPL: 106 dB (@ 1 Meter)

- Crossover Frequency: 3.2 kHz

- Monitor Inputs: 1 x Balanced XLR, 1 x Balanced ¼” TRS, 1 x Unbalanced RCA

- HF Transducers: 1.25” Silk Dome Tweeter (Coaxial)

- LF Transducers: 6.5" Woven Glass Fiber Composite (Coaxial)

- Frequency Response: 35 Hz - 20 kHz

- Input Impedance: 10 kOhm

- Monitor Amplifier Power: LF Amplifier: 75 W /// HF Amplifier: 65 W

Specifications:

- Input Impedance: 10 kOhm